Grid View:
-33%
Quickview

14-pin IC Base

$0.09 $0.13

DescriptionThis is a 14 pin IC Base with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the IC later. IC bases are also useful if you want to reus..

Quickview

16-Pin-IC Base

$0.20

DescriptionDip sockets for all your prototyping needs.  If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are!  Number of pins include: 8, 14, 16, 18, 28, and 40. ..

Quickview

18-pin IC Base

$0.15

DescriptionThis is a 18 pin IC Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) .Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the IC later. IC bases are also useful if you want to re..

Quickview

24-pin IC Base

$0.20

DescriptionThis is a 24 pin IC Narrow Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the IC later.IC bases are also useful if yo..

Quickview

24C04-Serial CMOS EEPROM-512x8-bit-4K

$0.23

Description24C04 512x8(4k) Serial CMOS EEPROM. Features: Low Voltage and Standard-Voltage Operation2-wire Serial InterfaceSchmitt Trigger, Filtered Inputs for Noise SuppressionBi-directional Data Transfer Protocol100kHz and 400kHz CompatibilityWrite Protect Pin for Hardware Data Protection8-byte Page (1K, 2K), 16-byte Page (4K, 8K, 16K) W..

Quickview

28-pin IC Base

$0.20

DescriptionThis is a 24 pin IC Narrow Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) .Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the IC later.IC bases are also useful if you..

Quickview

40 Pin-IC Base

$0.08

DescriptionDip sockets for all your prototyping needs.  If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are!  Number of pins include: 8, 14, 16, 18, 28, and 40..

Quickview

6-Pin IC Base

$0.13

DescriptionThis is a 6 pin IC Base (DIP Socket) with pins spaced at 0.1"(2.54 mm) . Use this IC base for easily plugging in and out ICs during prototyping. Also use this IC base to protect IC from damage due to heat while soldering by first soldering the base to the board and then plugging in the IC later. IC bases are also useful if..

Quickview

74HC595 Shift registration machine

$0.41

Description74HC595 Shift RegisterThe datasheet refers to the 74HC595 as an "8-bit serial-in, serial or parallel-out shift register with output latches; 3-state." In other words, you can use it to control 8 outputs at a time while only taking up a few pins on your microcontroller. You can link multiple registers together to extend your out..

Quickview

8-Pin-IC Base

$0.13

DescriptionDip sockets for all your prototyping needs.  If you've ever had to de-solder a dip part from a circuit board, you know how valuable these are!  Number of pins include: 8, 14, 16, 18, 28, and 40...

Quickview

AD623AN-AD623 Single Supply Instrumentation Amplifier ×10

$60.00

DescriptionThe AD623 is an integrated, single- or dual-supply instrumentation amplifier that delivers rail-to-rail output swing using supply voltages from 3 V to 12 V.The superior accuracy of the AD623 is the result of increasing ac common-mode rejection ratio (CMRR) coincident with increasing gain; line noise harmonics are rejected due to constant..

Quickview

ADC0804-8-bit A/D converter ×10

$24.27

DescriptionADC0804 - 8-bit A/D ConverterFeaturesCompatible with 8080 MicroprocessorsEasy interface to all microprocessors, or operates 'stand alone'Differential analog voltage inputsLogic inputs and outputs meet both MOS and TTL voltage level specificationsWorks with 2.5V (LM336) Voltage ReferenceOn-chip clock generator0V to 5V analog input..

Quickview

Decade counter 4017

$0.33

DescriptionCD4017 IC - Decade Counter ICProduct Details:Product Type: Decade CounterIC Number: CD4017 or 4017 ICFunctions: counts from 0 to 10 as well as decode to binary numberOutput type: binary numberPin counts: 16Technology: CMOSPin type: Through HolePackage contains: 1 X 4017 counter IC (Original)..

Quickview

Optocoupler - 4N35

$0.30

Description4N35 is an optocoupler IC in which an infrared emitter diode drives a phototransistor. They are also known as optoisolators since they separate two circuits optically. These are used to couple two circuits without any ohmic contact. They allow one of the circuits to switch another one while they are completely separate. Th..

Quickview

Shift register Ic-74HC195

$0.74

DescriptionThe 74HC series are high speed CMOS chips that combine the speed of TTL (transistor-transistor-logic) and the very low power consumption of the 4000 series. They have the same pin-out as the 74LS series.This IC is 16 pin DIP package...

Showing 1 to 15 of 15 (1 Pages)